The concrete grinding process can begin once you have everything ready. As an example, let’s look at the garage floor because it’s an excellent testing area before moving on to more sensitive surfaces.
Start by cleaning the surface
Starting by cleaning the floor is the first step. So, sweep it clean with a broom and remove gum, grease, and similar stains using a broom. As a last resort, consider vacuuming it or even using a power washer if it’s necessary. Ideally, you shouldn’t have any residue where the grinder might get stuck after cleaning.
Prepare the Angle Grinder
You will have more options to move around and be able to better control your work if the floor is divided into sections. Using a dust shroud is also a great way to minimize dust problems.
Now the wheel needs to be attached to the tool. Do not connect your grinder to the power source yet. So, make sure it’s unplugged and install an alternative pad or diamond polishing pad. Last but not least, wear safety equipment, such as earplugs, gloves, masks, and kneepads.
Working with your angle grinder will help smooth the garage floor. In addition, if you have difficulty reaching corners, you might consider using a smaller tool.
The experts recommend dividing the floor into sections and smoothing the edges first. This is a matter of preference, so choose the method that suits you best. Smoothing concrete might be easier if you make circular moves with your grinder, starting from the perimeter inwards.
Correct any imperfections
Following the grinding process, it’s time to check the results of your work. Hence, check the floor to see if there are any imperfections. If you find a section in which the results aren’t up to par, grind that section again.
However, before you do so, remove the dust shroud from the tool. In this way, the grinder will have a better grip on the floor. Last but not least, dust residue must be removed from the floor by mopping or vacuuming it.